Conductivity sensors from Aanderaa are compact, fully integrated sensors for measuring the electrical conductivity of salt water. Conductivity is a key parameter for in-situ measurements of several fundamental physical properties of salt water.
For saltwater, the ability to conduct electrical current is mostly dependent on temperature and the amount of inorganic dissolved solids. This means that, together with
temperature and depth information, a good estimate of the salinity may be determined. Salinity is defined as the concentration of dissolved solids. This means that, together with temperature and depth information, a good estimate of the salinity may be determined. By using the inductive principle, stable measurement can be obtained without utilizing electrodes that are easily fouled and may wear out in the field.
Salinity is defined as the concentration of dissolved solids. Other important properties of saltwater are again dependent on the salinity. Among these are the density and the speed of sound.
The Aanderaa Conductivity Sensor is based on an inductive principle.
The Smart sensor, inculding the conductivity sensor can be mounted directly on the top-end plate of the Aanderaa SmartGuard datalogger, in a String System node or connected to the SmartGuard datalogger and hence automatically detected and recognized.
- Smart Sensor for easy integration with SeaGuard
- Direct readout of engineering data
- Internal pressure never exceeds 1 bar therefore
electronics and sensors are unaffected by sea depth
- Rugged and robust with low maintenance needs
- Output format AiCaP CANbus, RS-232
- 3 depth ranges available max. 6000 meters